日本南部铁器铁瓶圆形贝霰 1.1L 松鹿堂传统工艺士菊池真吾制作

Name: 日本南部铁器 铁瓶 圆形贝霰 1.1L 松鹿堂 传统工艺士 菊池真吾制作
Brand: Shokado
SKU: KEKABK11
Price: 7975.0 CNY
Availability: OutOfStock

SKU: KEKABK11

¥7,975.00

Quantity

Notice

The surface is coated with an antirust oxide layer using the traditional technique called kama-yaki (high temperature baking treatment), but as it is cast iron, rust may occur due to moisture and humidity.

DESCRIPTION

此商品会在收到您的订单后大约一至两周发货。

我们很高兴向各位介绍一款与及富制作的铁瓶截然不同的独特铁瓶。此款铁瓶是出自菊池真吾（Shingo Kikuchi）之手。菊池是位经验丰富且受人尊敬的传统工艺士，其工坊——松鹿堂与及富一样皆位于岩手县奥州市。

“传统工艺士”之称号是由日本政府授与拥有先进技术和精湛技艺的工匠之殊荣。在日本南部铁器领域中，仅有几十位工匠拥有此一殊荣，而菊池真吾就是其中受人尊敬的一员。

南部铁器的铸造方法有两种：一种是利用砂模的生型法；另一种则是使用在窑中烧制而成的黏土模具的烧型法。此款铁瓶是以烧型法制成，由于一个模具仅能制作出少数有限的数量，因此极为稀有。

每一种霰形图纹都是日本南部铁器的独特图纹，呈现优雅的螺旋状设计。此件作品本身包括瓶盖上的海螺壳造型盖钮，都是从海螺壳图案中汲取灵感。此错综复杂的霰形图纹极为罕见，在制作上也较为困难，使得此类完美无瑕的工艺品产量极少。此复杂性也增加本款珍贵创作的价值。

值得注意的是点缀在把手上的小孔。把手由一整块铁板铸造成型，具有独特的意义。除了能够防止把手过热之外，还展现了扎根于茶道传统的典型日本美学，象征蕴含时间演变之美。

铁瓶内部采用“釜烧”技术，在表面上施以一层氧化膜，且不使用任何涂漆。瓶身内部分略微红色的色调就是釜烧后的结果。

与同类产品相比，此款特殊铁瓶的价格较高。然而，因采用烧型法，坚持大胆和传统的美学构图，再加上传统工匠的亲笔题字“南部真吾（Nambu Shingo）”，愿此款非凡的铁瓶可终身陪伴您的生活。

请注意，本商品也有在实体店销售。库存情况可能会随时变化。因此订购的商品有缺货的可能，敬请见谅。

此外，由于每件产品均为手工制成，实际产品可能与图片略有不同。

Materials

Cast iron, Steel(handle), Surface: Japanese lacquer baking finish Interior: Oxidized film finish by kama-yaki (unglazed), no coating

适用于所有炉灶，包括电磁炉

DIMENSIONS

Body diameter excluding the spout: approx. 18.5cm
Height to the handle: approx. 18.5cm
Full capacity: 1.2L
Weight: approx.2.04kg

CARE INSTRUCTIONS

When using induction heating, use low to medium heat.
Do not wash with detergent.
Do not wash using a sponge or scrubber.
Wipe off the excess water around the lid and other parts well, as discoloration and rusting can easily occur.
Please note that cooking near this pot may result in oil stains and discoloration due to oil splashes.
If the gas flame reaches the body of the pot, the part is likely to discolor, so be careful not to increase the heat too much.
Used over an open flame, the base will gradually turn white.

让茶和咖啡变得更好

在南孚铁壶中煮沸的水，即使直接饮用，味道也很醇厚和甜美。

这是由于铁浸入热水的效果，但为了使铁浸出，内部不能用搪瓷或其他方式处理，容易发生锈蚀。

南部的铁器是用称为釜焼的传统技术进行烘烤，在表面产生一个氧化层。这导致了 "防锈 "和 "水质改善"，使茶和咖啡的味道更好。

INTERNATIONAL SHIPPING

International Shipping Available

All items are eligible for international shipping.

Items are manufactured after receiving orders and will be shipped from Japan in about 1-2 months(Maximum 3 months for items labeled "made-to-order").
The schedule may be revised depending on destination countries, shipping companies, and changes of customs rules.

CUSTOMS DUTY

About Customs Duties and Taxes

Your final payment on our website includes the price of the product and shipping costs, but does not include any other fees required for international shipping, such as import taxes, customs duties, and other fees.

Please be aware that in all cases you are responsible for paying any import fees applied to your order.

These fees are set in detail for each country and region, and the rules are revised frequently. Please make sure that information is up to date when you place an order.

Refunds due to customs or import issues that are not our responsibility will not be accepted.